This is a MINIPRO® H1 voltage and current sensor board. DC current is determined by a fully integrated Hall Effect based linear current sensor. This sensor is extremely accurate and requires a calibration each time the dyno is powered.
Sensor Specification:
| Max Voltage | Max. Current | Vol. Accuracy | Current Accuracy | UPC |
| 13V | 50A | +/- 0.05V | +/- 0.10A | 0753340771016 |
| 13V | 100A | +/- 0.05V | +/- 0.20A | 0753340771023 |
| 13V | 150A | +/- 0.05V | +/- 0.25A | 0753340771030 |
| 13V | 200A | +/- 0.05V | +/- 0.30A | 0753340771047 |
| 50V | 50A | +/- 0.05V | +/- 0.10A | 0753340771153 |
| 50V | 100A | +/- 0.05V | +/- 0.20A | 0753340771160 |
| 50V | 150A | +/- 0.05V | +/- 0.25A | 0753340771177 |
| 50V | 200A | +/- 0.05V | +/- 0.30A | 0753340771184 |
Note: Minimum operation voltage is 5V. Above accuracy was tested using 12AWG@100mm length at each side of the sensor (200mm wire total). To reduce the losses of our sensor, try to reduce the wire length as much possible.
Package Content:
Note: 3 pins sensor cable not included.
Downloads:
